Browse over 9,000 car reviews

Holden Statesman 2003

What's on this page

Holden Statesman 2003

The 2003 Holden Statesman range of configurations is currently priced from $4,290. Our most recent review of the 2003 Holden Statesman resulted in a score of 8 out of 10 for that particular example. You can read the full review here.

This is what Ewan Kennedy liked most about this particular version of the Holden Statesman: Roomy, Readily available spare parts and servicing, Quality interior

The 2003 Holden Statesman carries a braked towing capacity of up to 2100 Kg, but check to ensure this applies to the configuration you're considering.

The Holden Statesman is also known as the HSV Grange, the Buick Park Avenue, the Buick Royaum, the Chevrolet Caprice, the Daewoo Veritas and the Daewoo Statesman in markets outside Australia.

Holden Statesman 2003 Wheel size

Wheel size for the 2003 Holden Statesman will vary depending on model chosen, although keep in mind that many manufacturers offer alternate wheel sizes as options on many models.The wheel size available will alter the range of tyres available to be fitted. Standard wheel sizes on the Holden Statesman vary from 16x7 inches to 17x8 inches.

Holden Statesman Model Body Type Front Tyre Size Front Rim Rear Tyre Size Rear Rim
V6 Sedan 225x55 R16 16x7 inches 225x55 R16 16x7 inches
V8 Sedan 225x55 R16 16x7 inches 225x55 R16 16x7 inches
International LS8 Sedan 235x45 R17 17x8 inches 235x45 R17 17x8 inches
See All Holden Statesman 2003 Wheel Sizes

Holden Statesman 2003 Price and Specs

The Holden Statesman 2003 is currently available from $4,290 for the Statesman V6 up to $7,150 for the Statesman V8.

Pricing guides

$5,720
Based on third party pricing data
Lowest Price
$4,290
Highest Price
$7,150
Holden Statesman Model Body Type Specs Price from Price to
International LS8 Sedan 5.7L ULP 4 SP AUTO $4,840 $7,150
V6 Sedan 3.8L PULP 4 SP AUTO $4,400 $6,490
V6 Sedan 3.8L ULP 4 SP AUTO $4,290 $6,380
V8 Sedan 5.7L ULP 4 SP AUTO $4,730 $6,930
See All Holden Statesman 2003 Pricing and Specs

Holden Statesman 2003 Dimensions

Dimensions for the 2003 Holden Statesman are dependent on which body type is chosen. The maximum width and height is 1847mm x 1459mm and can vary on the basis of model.

Dimensions for the Holden Statesman 2003 Dimensions  include 1459mm height, 1847mm width, 5237mm length.
Holden Statesman Model Body Type Height x Width x Length Ground Clearance
V6 Sedan 1459x1847x5237 mm 125 mm
V8 Sedan 1459x1847x5237 mm 125 mm
International LS8 Sedan 1459x1847x5237 mm 125 mm
See All Holden Statesman 2003 Dimensions

Holden Statesman 2003 Towing capacity

The Holden Statesman has maximum towing capacity of 2100kg. Some models also offer heavy-duty or towing option packs which can increase towing capacity, as well as options which can hamper towing capacity. Towing capacities can vary wildly on a large number of factors. These include engine, transmission, model, and options chosen. Always check with the manufacturer or in your vehicles handbook before attempting to tow anything.

Holden Statesman Model Body Type Specs Braked Capacity
V6 Sedan 3.8L,ULP,4 SP AUTO 2100kg
V6 Sedan 3.8L,PULP,4 SP AUTO 2100kg
V8 Sedan 5.7L,ULP,4 SP AUTO 2100kg
International LS8 Sedan 5.7L,ULP,4 SP AUTO 2100kg
See All Holden Statesman 2003 Towing Capacity

Holden Statesman 2003 Fuel consumption

Fuel consumption for the 2003 Holden Statesman is dependent on the type of engine, transmission, or model chosen. The Holden Statesman currently offers fuel consumption from 9.7 to 11L/100km. The Holden Statesman is available with the following fuel types: ULP and PULP.

Holden Statesman Model Body Type Specs Fuel Consumption
International LS8 Sedan 5.7L,ULP,4 SP AUTO 11L/100km
V6 Sedan 3.8L,ULP,4 SP AUTO 9.7L/100km
V6 Sedan 3.8L,PULP,4 SP AUTO 10.8L/100km
V8 Sedan 5.7L,ULP,4 SP AUTO 11L/100km
* Combined fuel consumption See All Holden Statesman 2003 Pricing and Specs

Holden Statesman 2003 Q&As

Check out real-world situations relating to the Holden Statesman here, particularly what our experts have to say about them.

  • The clock and radio display in my 2004 Holden Statesman won't turn off

    I'm not sure how an electric piece of equipment continues to function when its fuse or relay has ben removed, so maybe you need to check that you're pulling the correct fuse. The car's owner's manual should contain a list of fuses, their location and what circuit they relate to.

    In any case, problems like this one are often the fault of the car's body computer which can fail, allowing all sorts of random errors to crop up in anything from the climate-control stuff to the central locking. If that's the case, a new body computer may be required, but these can be obtained second-hand to keep costs down.

    But before you do any of that, try these simple tricks: Using the key fob, press the door lock button and hold it down for at least a minute. Sometimes, this is enough to reboot the computer and restore normal settings. The second thing to try is to park the car and disconnect the negative battery terminal. Wait at least an hour (overnight is better) and then reconnect the battery and see if the car's computer has reset itself. It doesn't always work, but it's free and definitely worth a shot. Just make sure you have access to the radio's security code to restart it after disconnecting the battery.

    Show more
  • Will a VT Commodore V6 3.8-litre engine fit into a 2004 WK Statesman V6 3.8?

    Both those models of Holden used the same engine; the L36 (Holden's internal code) Ecotec V6. As such, you should be able to fit the engine from the VT Commodore into the Statesman with very few other changes. The biggest hurdle will be if the Commodore donor car was a manual-transmission vehicle, as the ECU may be different to the Statesman's unit to allow for control of the electronic transmission. The best bet is to retain the Statesman's wiring and computer and change over only the engine hardware from the Commodore.

    The other (minor) catch is that the VT's version of the V6 was tuned for 147kW, while the later version of the same engine in the Statesman was good for 152kW. There was a small torque difference, too (304Nm plays 305Nm). So you'll be trading off a small amount of performance but, realistically, not enough to notice.

    Show more
  • Why is there a leak in my 1998 Holden Statesman?

    This is a very common complaint among owners of Holdens of this era. If you’ve checked all the likely places for water to enter, then you have to start thinking laterally. Does the car have an aftermarket of dealer-fitted rear spoiler? The mounting holes of these can be great places for water to enter the boot. But believe it or not, this series of full-sized Holdens was also susceptible to a manufacturing glitch where the rear quarter-light windows weren’t sealed properly. Water can, apparently, enter here and find it’s way into the boot. It sounds crazy, but I’m assured it’s a thing with these cars.

    Show more
  • Mazda 8 - Could Mazda build a Commodore or Statesman-sized sedan?

    The short answer is no, as the Mazda6 has never sold to expectations and all the action in the luxury sphere is in SUVs or crossovers.

    However, with Mazda heading into the premium space and in model-sharing activities with arch-rival Toyota, a 6-style sedan based on the mooted coming, rear-drive and inline six-cylinder powered CX-5 replacement is expected, possibly to be shared with a Toyota or Lexus model. These are pure rumours right now, but a possible scenario as Mazda attempts to amortise the development and engineering costs of its next-generation architectures.

    But we don't believe a sedan or wagon larger than a Mazda6 would be part of these future plans – not in the foreseeable future, anyway.

    Show more
See All Holden Statesman Q&As
Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. Carsguide is not liable for the accuracy of any information provided in the answers.