Holden Astra 1987

Holden Astra 1987 Q&As

Check out real-world situations relating to the Holden Astra here, particularly what our experts have to say about them.

• Parts and servicing for a 2018 Holden Astra

  Even though the Holden brand isn't selling new cars any longer, the brand still exists to service Holdens already on the road in Australia. Spare parts for an Astra are no problem to get hold of, either through a Holden service centre or from any number of suppliers, many of whom have websites you can look up.

  That said, I wouldn't be too picky about having a 2018 car serviced by Holden, as any good workshop should be able to tackle any job on this relatively conventional car. But, if you do wish to use a Holden service centre, there are nine listed in the Perth area, so finding one shouldn't be a problem.

  Show more Show less
• How do I start a 2003 Holden Astra after it has run out of fuel?

  This shouldn't be too difficult, as the 2003 Astra was only available with a petrol engine. If your car was a diesel-powered car (available in the next generation of Astra) the situation could be much more complicated. As it is, however, you should really only need to add fresh fuel to the tank, switch on the ignition for a few seconds to allow the fuel pump to prime the engine and then hit the starter. Don't crank the engine for long periods if it's a bit slow to start a this will drain the battery and potentially overheat the starter motor. Instead, try starting the engine in bursts of a few seconds at a time with a little time between to let things cool down.

  Sometimes, however, the fuel pump won't appreciate being allowed to run dry and this can cause internal damage to the pump sufficient for it to need replacement. Generally, though, if you can hear the pump buzzing with the ignition on, the pump is working. In some extreme cases, the pump may not be able to prime the engine and the solution then is to spray a little starter fluid down the intake system to start the engine and hopefully allow the pump to catch up. But be warned, this is a dangerous process and should only be tried by somebody who knows what they're doing. It also involves undoing some of the trunking or piping to gain access to the engine's intake.

  The other potential hazard with running a car dry of fuel is that you'll drag all the silt, rust and dirt that once sat harmlessly in the bottom of the tank through the engine and into the fuel system. So you would be well advised to change the fuel filters and check that no rubbish has entered the system.

  Show more Show less
• The car alarm system in my 1998 Holden Astra hatch activates for no reason, what could be the problem?

  Holden Astras of this vintage have been known to suffer false alarms from the security system, and it seems as though a re-flash or replacement of the ECU (on-board computer) is the ultimate fix. In many other cases, false alarms are the result of faulty switches and sensors, but the Astra’s track record suggests the computer will be the culprit. At which point you have a decision to make which may involve disabling the alarm system altogether (make sure you advise your insurance company if you go down this road).

  This model Astra was also infamous for a radio that could turn itself on (independent of the ignition system) and flatten the battery.

  Show more Show less
• How do I get a key programmed to my 2006 Holden Astra?

  There are two possibilities here and it will all depend on whether your car is a 2005 model (that was first sold in 2006) or a post-facelift model and also whether it’s a TS Astra or an AH model Astra. If it’s the earlier car, then you might be in luck. The process involves taking the new key, placing it in the ignition and turning the ignition on (without starting the engine). Then, when all the dashboard lights are lit up, you press one of the remote buttons on the key. And that’s about it. You should hear the car lock and then unlock itself to let you know the process is complete and you’re good to go.

  For post-2005 models, however, things are not so simple. In this case, you need to either visit a locksmith or a workshop that has the Holden diagnostic gear, as the new key needs to be coded to the car via the diagnostic port. That said, I’d give the first method a try before spending money at a workshop. Who knows, you might just get lucky.

  Show more Show less